Webbing, Tailored, Jay Jays, Custom HALO, DPM, 926, Used

Description

Complete DPM belt kit webbing set from Jay Jays of Brecon in a custom configuration

UK made to the highest standard by the market leader, MOD spec. materials throughout.

Simple, streamlined, robust and comfortable, this is belt kit webbing as it should be.

Custom made HALO model, single unit webbing set with hip pad and roll pin buckle, and sewn in yoke

From left to right as viewed:

1 x double ammunition pouch, twin compartment design, total capacity is 6 x 30 round 5.56mm magazines. Full box lids to reduce water and dust ingress, full depth Velcro closures with pull tabs

1 x small Velcro closed pouch on the leading side, large enough for older 20×19 FFD or HE AP grenade

Zipped admin’ pouch behind the ammunition pouches, two way zip, opens on three sides, sewn strap lengths as pen loops or lanyard anchors, ideal pouch for compass, slates, cribs, notepad or similar items

4 x utility pouches, adjustable strap & buckle, with secondary Velcro closure patches

Strapping for the buckles has been sewn in such a way as to provide a loop for a utility compression strap or bungee cord, foliage loops on all pouches to further facilitate this

First utility pouch on the left has strapping for PLCE bayonet frog on the leading side, frog is not included, single horizontal strap length on trailing side

Elastic covered opening in the lid of this pouch, allows use as a magazine dump pouch or for radio carriage, elastic is beginning to lose strength

1 x command / admin pouch, design as per utilities

Main pouches are two layers of 1000D Cordura

Upper edge has 2 metal D rings as yoke fittings at the front

HK type metal clip on sewn loop for helmet carriage

Yoke is sewn in at the back, mesh back with padded shoulder straps, wider than standard design, these adjust for length at the front, loops to retain initial issue PRR pouch on left strap as worn, garb / hanging strap on the shoulders

Attached nylon webbing belt closes and adjusts with metal roll pin buckle, metal tab end

Pouches are all individual parts and sewn directly to the pad, the pad features a belt running behind the pouches; this allows the user to remove and replace a damaged pouch in the field without stitching or specialist equipment. This belt length is not accessible unless pouches are removed

Size small, this set measures 27″ + 19″ (68+ 49cm) from end to end along the top edge of the pad, second figure refers to length of belt fitted

Recommended for users with a waist size between 30″ and 34″

Condition is used. Remnants of camouflage paint, marked from field use, clear signs of use and wear, all buckles, straps and Velcro are good, elastic in pouch lid is losing strength

No damage or repairs, no obvious previous user marks

Webbing shown is the set you will receive (except images with radio in place, these are another set from our archives)

Multiple views shown, contents for illustration only, single empty set supplied, all munitions are inert