Webbing Set, Modular MOLLE, Blackhawk, OD, SFSG, Used

Description

Complete modular webbing belt set by Blackhawk

Parts as issued to UKSF during the ‘Global War on Terror’ early 2000’s, we believe this came from 1 PARA SFSG

10 piece MOLLE / PALS set

All items in olive drab green, 1000 Denier Cordura

Set comprises:

STRIKE LBE Harness (belt & yoke) BH code 37CL40OD*

1 x MOLLE / PALS hip pad, 2 section design with padded back, pockets for additional padding / floatation aids, 8 additional USCG approved, closed cell, foam floatation aid pads included

Size adjustment at the back between the sections

Modified from factory design with a roll pin buckle and adjustable belt section

Total of 20 loops of strapping on 5 rows (including gaps), 8 x yoke fittings points, mixture of tri-glides & ladder locks, two different widths

1 x 8 point yoke, wide, H type design, mesh back, wide padded shoulders, length adjustable straps, sternum strap, grab / hanging handle, MOLLE fittings, D rings, superior weight distribution

2 x ammunition pouch, height adjustable Velcro flap closures with pull tabs, will accommodate 2 x NATO 5.56mm magazines, MOLLE footprint for each is 2 wide x 6 high including gaps, BH code 37CL02OD

1 x smoke grenade pouch, height adjustable Velcro flap, internal loop for fly off lever, MOLLE footprint 1 wide x 5 high including gaps, will overlap adjacent strapping, BH code 37CL14OD

1 x Medical Trauma pouch, 2 way zip closure, full ‘clamshell’ opening, various internal elastic loops to organise & retain contents, MOLLE footprint is 3 wide x 6 high including gaps, BH code 37CL18OD red cross added to front in ink

1 x square utility pouch, mesh base for weight reduction & drainage, generous size, MOLLE strapping on front, 2 way zip closure, MOLLE footprint is 4 wide x 8 high including gaps, BH code 37CL60OD

1 x Canteen pouch, (original design) sized for US issue canteen, UK issue 2 pint bottle will fit, mesh base, foldaway Velcro flap & Y shaped strap & buckles closures, small pocket on side for purification items MOLLE footprint is 3 wide x 6 high including gaps, BH code 37CL11OD

 

1 x Canteen pouch, (second design) sized for US issue canteen & cup, UK issue 2 pint bottle will fit, mesh base, simple Velcro flap & buckle closure, flat pocket on underside of flap, MOLLE footprint is 3 wide x 6 high including gaps, Speed Clip fittings, BH code 38CL11OD

1 x single grenade pouch, sized for HE / AP, simple flap with adjustable strap & buckle closure, internal loop for fly off lever, MOLLE footprint 2 wide x 4 high including gaps, Speed Clip fittings, BH code 38CL12OD

Pouches are 1000D Cordura, those without mesh bases all feature drainage eyelets, strap & press stud MOLLE fittings unless otherwise specified

Set, as configured, measures 33” + 19” (84 + 49cm) from end to end along the top edge of the pads, second figure refers to total length of adjustable belt fitted (both side combined), excluding the buckle

Suggested for fit users with waist sizes from 30″, size may be easily increased by removing additional pads, further expansion available from straps at the centre back

Condition is use, some signs of use and wear, some tape on straps, no damage or repairs, no previous user marks

Paint or ink stain on one magazine pouch flap, as shown, a replacement flap is included

Set shown is the one you will receive

*LBE harness set does not include the third, centre back panel for the belt, associated with this item when new. This part is intended to be removable, and the set is much too large for most users when this part is fitted

Multiple views shown, set supplied, all contents for illustration, these are not included, all munitions are inert